Mirror Support Company, Inc. Installation

Instructions for Attaching Common Sense Mirror Support

All brackets and screws are packed between interlocking supports.  You can adjust the mirror's height even after the initial installation by loosening the machine screws, adjusting the rods to be higher or lower, then re-tightening the machine screws.

View instructions in PDF format

Step 1

• Attach each support to the back of your mirror
  frame using one screw at the top and one bracket
  at the bottom, as shown.

Step 2

• Determine placement of dresser brackets on back of
  dresser so that they will be vertically aligned with
  brackets on the mirror.
• Fasten two brackets at the top edge of the dresser
  and fasten two brackets to the "blind rail" as
  detailed above.
• Important: Make sure brackets are securely
  fastened to solid "blind rail".

Step 3

• Loosen four set screws in the bracket on
  the dresser.
• Insert mirror supports attached to mirror
  through brackets.
• Move mirror to the desired height and tighten
  set screws.

Use the best mirror supports available; your customers deserve it.