Mirror Support Company, Inc. Support Installation

Dear Customer,

The employees of Garrett Mirror Support Co. would like to thank you for the purchase of our products.
Should your furniture arrive with additional attachment devices such as wooden or metal strips,
please discard these at this time and follow the above instructions.

Once again, thank you for your purchase!

Sincerely,
The employees of Garrett Mirror Support Co.

Instructions for Attaching Common Sense Mirror Support

All brackets and screws are packed between interlocking supports.  You can adjust the mirror's height even after the initial installation by loosening the machine screws, adjusting the rods to be higher or lower, then re-tightening the machine screws.

View instructions in PDF format

Step 1

• Attach each support to the back of your mirror frame using one screw at the top and one bracket at the bottom as shown
  Note: By letting the supports hang from the top screw, they will automatically “self-level”

Step 2

• Determine placement of the brackets on back of the dresser so that they will be vertically aligned with brackets on the mirror.
      Fasten two brackets at the top edge of the dresser, and fasten two brackets to the “blind rail” as detailed above.
  Important: The solid “blind rail” can be located by removing the drawers of the chest. Some furniture may not include a “blind rail”

Step 3

• Insert mirror supports attached to the mirror through brackets mounted onto the chest. Move mirror to desired height and tighten set screws

Use the best mirror supports available; your customers deserve it.